Device

In the Device menu you may display basic device info and set-up the basic device parameters and internet security.

Device settings

Displays the device hardware info and allows to set the name and time-zone of the device.

Parameter ([API name])	Default value	[VALUE]	Description
`Name` (devicename)	`my_uni`	String of up to 25 characters	Name of the device used for its easier identification in the network. It is also used as an SSID in case of the Wi-Fi `AP mode`.
`Product`	- (passive information)		Official product code of the ayatec firmware present of the device.
`S/N`			The ayatec serial number of the device.
`Firmware`			Version of the ayatec firmware currently present on the device.
`MAC address`			A unique physical identifier of the ESP8266 Wi-Fi network module.
`Current time`			Real time clock of the device.
`Time-zone` (timezone)	`0` (UTC)	selection of integer between `-12` and `30`	Time-zone relative to UTC in which the device's real time clock should be referenced. (Changed to a drop-down selection in version 1.06)
`DST` (dst)	`2` (Auto [EU])	`0` for `Inactive` or `1` for `Active` or `2` for `Auto (EU)` or `3` for `Auto (US)` or `4` for `Auto (Aus)` or `5` for `Auto (NZ)`	When Daylight Saving Time is `Active` or `Auto` with the current date falling within a predefined date range, an extra hour is added to the device's real-time clock. Changes effective immediately. (Introduced in version 1.06, Auto functionality added in version 1.14)
`Units`	`0` (in/°C)	`0` for `cm`/`°C` or `1` for `in`/`°F` or `2` for `cm`/`°F` or `3` for `in`/`°C`	Chooses between Imperial and SI (International System of Units) measurement units. (Introduced in version 1.14)

Please, find below the time-zone options:

[VALUE]	Time-zone
`-12`	UTC-12:00 - International Date Line West
`-11`	UTC-11:00
`-10`	UTC-10:00 - Hawaii
`20`	UTC-09:30 - Marquesas Islands
`-9`	UTC-09:00 - Alaska
`-8`	UTC-08:00 - Pacific Time (US & Canada)
`-7`	UTC-07:00 - Mountain Time (US & Canada)
`-6`	UTC-06:00 - Central Time (US & Canada)
`-5`	UTC-05:00 - Eastern Time (US & Canada)
`-4`	UTC-04:00 - Atlantic Time (Canada)
`21`	UTC-03:30 - Newfoundland
`-3`	UTC-03:00 - Argentina, Brazil, Uruguay
`-2`	UTC-02:00
`-1`	UTC-01:00 - Azores, Cape Verde Is.
`0`	UTC - Coordinated Universal Time (default)
`1`	UTC+01:00 - Central European Time
`2`	UTC+02:00 - Eastern European Time
`3`	UTC+03:00 - Moscow, St. Petersburg, Volgograd
`22`	UTC+03:30 - Iran Standard Time
`4`	UTC+04:00 - Abu Dhabi, Muscat
`23`	UTC+04:30 - Afghanistan
`5`	UTC+05:00 - Islamabad, Karachi
`24`	UTC+05:30 - India Standard Time
`25`	UTC+05:45 - Nepal
`6`	UTC+06:00 - Almaty, Dhaka
`26`	UTC+06:30 - Yangon (Rangoon)
`7`	UTC+07:00 - Bangkok, Jakarta, Hanoi
`8`	UTC+08:00 - Beijing, Hong Kong, Singapore
`27`	UTC+08:45 - Eucla (Australia)
`9`	UTC+09:00 - Tokyo, Seoul
`28`	UTC+09:30 - Central Australia Time
`10`	UTC+10:00 - Eastern Australia, Guam
`29`	UTC+10:30 - Lord Howe Island
`11`	UTC+11:00 - Solomon Is., New Caledonia
`12`	UTC+12:00 - Auckland, Wellington
`30`	UTC+12:45 - Chatham Islands
`13`	UTC+13:00 - Nuku'alofa
`14`	UTC+14:00 - Line Islands

Parameter ([API name])	Default value	[VALUE]	Description
`Password` (masterpass)	`passw123`	String of up to 25 characters	Device administrator password for extended access. This password is also used to access the device in Wi-Fi `AP mode`, but needs to be at least 8 characters long to work properly. Learn more...
`Origin` `(CORS)` (origin)	`null`	String of up to 45 characters	Origin of the web interface from which the device will be accessed. Keep `null` when using an offline local copy of the interface or the app.
`Web` `protection` (secure)	`Disabled`	`0` for `Disabled` or `1` for `Enabled`	Allow or disable password protection for web access. Only keep this `Disabled` if the device is not accessible outside of your secure and trusted network. Learn more...
`Extended serial` (serial)	`Enabled`	`0` for `Disabled` or `1` for `Enabled`	If physical access to the device is not adequately restricted, the user can use this setting to disable printing of extended debug messages and accepting user commands through the Serial port. Learn more...
`Display` (display)	`Show all`	`0` for `Show all` or `1` for `Hide system info` or `2` for `Hide all`	If physical access to the device is not adequately restricted, the user can use this setting to hide either `System` or `All` information from the Display loop. (Introduced in version 1.06)

The device will accept HTTP requests at the following URLs:

(POST) http://[IPv4]/var_set?param=[API name]&val=[VALUE]
(GET) http://[IPv4]/var_request?param=[API name]

POST: http://192.168.1.255/var_set?param=timezone&val=1

will set the time zone of the device to Western European Summer Time.

Learn more in HTTP API.

This parameter cannot be accessed via MQTT. Learn more in MQTT API.